9 Authentication and Accounting Features
202
Check influence before changing the Azure Active Directory settings.
For details of Azure Active Directory, refer to the official website of Microsoft Corporation.
Preparation for Azure Active Directory Using
The Approval by Administrator in Azure Active Directory
In order to use Azure Active Directory feature on the device, the customer needs to consent
that the device may perform the following process.
User Authentication
Read basic information, such as user names
Read user's Email addresses
Read directory group data
The following describes the procedure of consent.
1
Enter the following URL into the address box on the browser, and then press the <Enter>
key.
https://login.microsoftonline.com/common/adminconsent?client_id=8d4725eb-672b-
4d11-8f26-069a8844097b@redirect_uri=https://account.fujixerox.com/
consentResult.html
2
Log in as a tenant administrator.
3
The consent screen for the authority is displayed. Confirm the contents and click [Accept].
4
Close the web browser when the consent success screen is displayed.
DNS Server Settings
To use this feature, you need to configure the settings for the DNS server.
For information on settings, refer to "[IPv4 - DNS Server Setup]" (P.151) or "[IPv6 - DNS Server Setup]" (P.151).
Proxy Server Settings
To use this feature, you need to configure the settings for a proxy server.
For information on settings, refer to "[Proxy Server Settings] / [Proxy Server Settings - Ethernet 1], [Proxy
Server Settings - Wi-Fi]" (P.153).
Connection Settings to the Azure Active Directory
The procedure of required settings for the connection between the device and the Azure
Active Directory is as follows.
1
Start CentreWare Internet Services and log in to the System Administration mode.
For details, refer to "Starting CentreWare Internet Services" (P.65).
2
Click [Permissions] on the left menu.
To Next Page
Loading...
Need help?
General
