Email Features Environment Settings
45
For more information, refer to "[Device's Email Address / Host Name]" (P.152).
3) Tap [<] to return to the [Connectivity & Network Setup] screen.
6
Configure the server settings for receiving emails.
1) Tap [Outgoing / Incoming Email Settings].
When [SMTP] is selected for [Protocol to Receive Email]
Configure the SMTP server.
For information on how to configure the SMTP server, refer to "[SMTP Server Settings]" (P.155).
For information on how to set the device's email address when you receive emails via SMTP, refer to
"[Device's Email Address / Host Name]" (P.152).
When [POP3] is selected for [Protocol to Receive Email]
Configure the POP3 server.
For information on how to configure the POP3 server, refer to "[POP3 Server Settings]" (P.155).
For information on how to set the device's email address when you receive emails via POP3, refer to
"[Device's Email Address / Host Name]" (P.152).
When you enable POP over SSL in the POP3 Server Setting, receiving email will be encrypted. POP over SSL can
be set using CentreWare Internet Services.
7
Configure the server settings for sending emails.
To send emails, SMTP server settings are required. When [POP3] is selected in [Protocol to Receive Email],
configure the SMTP server in [Outgoing / Incoming Email Settings]. For information on how to configure the
email transmission, refer to "[SMTP Server Settings]" (P.155).
8
Press the Home button.
Rebooting the device is required to enable the settings. Reboot the device following the message on the
screen.
To Next Page
Loading...
Need help?
General
