Using the Operator Panel Menus 173
• WPS Setup
NOTE:
• WPS Setup feature is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless setting with the security method of WPS.
Values:
• Reset Wireless
NOTE:
• Reset Wireless feature is available only when the printer is connected using the wireless network.
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network
settings are reset to their default values.
Push Btn. Ctrl Cancel Cancels the wireless setting with the security method of WPS-PBC.
Start Starts the wireless setting with the security method of WPS-PBC.
PIN Code Start Config. Configures the wireless setting using the PIN code assigned
automatically by the printer.
Print PIN Code Prints the PIN code. Confirm it when entering PIN assigned to the
printer into your computer.
To Next Page
Loading...
Need help?
General
