Using the Operator Panel Menus 193
Tray4
NOTE:
• Tray4 is available only when three optional 550 sheet feeders are installed.
Purpose:
To specify the paper loaded in the optional 550 sheet feeder.
NOTE:
• For more information on supported paper sizes, see also "Usable Print Media" on page 118.
Paper Size
mm series
Auto
*
New Custom Size Portrait(Y) 297 mm* Specifies the
length of the
custom size paper.
210-355 mm
Landscape(X) 210 mm* Specifies the width
of the custom size
paper.
140-215 mm
inch series Auto
*
New Custom Size Portrait(Y) 11.7"* Specifies the
length of the
custom size paper.
8.3-14.0"
Landscape(X) 8.3"* Specifies the width
of the custom size
paper.
5.5-8.5"
Paper Type Plain
*
Plain Thick
Light Card
Heavy Card
Labels
Letterhead
Hole Punched
Colored
Other Type
Display Screen Off Does not display a popup menu that
prompts to set Paper Type and Paper
Size when paper is loaded in the optional
550 sheet feeder.
On* Displays a popup menu that prompts to
set Paper Type and Paper Size when
paper is loaded in the optional 550 sheet
feeder.
To Next Page
Loading...
Need help?
General
