EasyManuals Logo

Fuji Xerox DocuPrint P455 D User Manual

Fuji Xerox DocuPrint P455 D
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28 Specifications
Paper Size Bypass tray:
A4, B5, A5, Legal (8.5 × 14"), Folio (8.5 × 13"), Letter (8.5 × 11"), Executive, C5,
Com-10, DL, Monarch, Custom (Width: 76.2 – 215.9 mm, Length: 127 – 355.6
mm)
Standard 550 sheet tray / Optional 550 sheet feeder:
A4, B5, A5, Legal (8.5 × 14"), Folio (8.5 × 13"), Letter (8.5 × 11"), Executive,
Custom (Width: 139.7 – 215.9 mm, Length: 210 – 355.6 mm)
Paper Type Plain (60 – 80 gsm), Plain Thick (81 – 105 gsm), Lightweight Cardstock (106 – 163
gsm), Heavyweight Cardstock (164 – 216 gsm), Envelope, Labels, Letterhead, Hole
Punched, Colored, Other Type
IMPORTANT:
When using Fuji Xerox P paper (64 gsm)
For 2 sided printing, use the 60 – 163 gsm plain paper.
Use only the recommended paper. Using paper other than that recommended for
the printer can cause printing problems. Do not use special ink jet paper. For
information about the kind of the recommended paper, contact your local Fuji
Xerox representative.
Note that poor printing quality due to paper-related printing problems can occur
when using the printer in an environment that is dry, cold, or very humid.
Printing over the printed side or on the reverse side of paper that already has
been printed on can result in poor print quality.
When printing on envelopes, use envelopes that do not have adhesive applied.
The type of paper being used and environmental conditions can affect printing
quality. Because of this, it is recommended that you test print and confirm proper
print quality before using the printer.
Paper Tray Capacity Standard:
550 sheets (Standard 550 sheet tray (Tray 1)) + 150 sheets (Bypass tray)
Optional:
1650 sheets (Optional 550 sheet feeder: 550 sheets × 3 (Tray 2, 3, 4))
Maximum paper capacity:
2350 sheets (Standard + Optional)
IMPORTANT:
For special paper, there is a limitation of the following.
From the bottom of the tray, up to 20 mm height (Standard 550 sheet tray)
From the bottom of the tray, up to 10 mm height (Bypass tray)
When using Fuji Xerox P paper (64 gsm)
Output Tray Capacity Approximately 250 sheets (A4 ) (face down)
IMPORTANT:
When using Fuji Xerox P paper (64 gsm)
2-sided Printing Feature Standard
CPU ARM11 533 MHz
Memory Standard: 256 MB (Onboard)
Optional: 512 MB
Maximum memory capacity: 768 MB (Standard + optional 512MB memory)
IMPORTANT:
Depending on the function, the optional 512MB memory is required.
The above memory capacity does not guarantee print quality depending on the
type and content of print data.
HDD Optional: 160 GB or larger
IMPORTANT:
Depending on the function, the optional hard disk unit is required.
Items Description

Table of Contents

Other manuals for Fuji Xerox DocuPrint P455 D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint P455 D and is the answer not in the manual?

Fuji Xerox DocuPrint P455 D Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint P455 D
CategoryPrinter
LanguageEnglish

Related product manuals