FujiFilm FinePix S1 - Protection Settings; Protecting and Unprotecting Individual Image

88
Protection Settings
1
Press the “PLAY” button and then press “d” or “c” on
the 4-direction button to display the image for which
you want to set or remove the protection.
2
Press function button [3].
With the Protection setting set to “OFF”
3
Press function button [1].
• When you press function button [1], protection is specified for the
selected image.
• A key icon appears in the top-right corner of the protected images.
• To protect another image, use “d” or “c ” on the 4-direction button to
select the image.
• To cancel the procedure, press the “CANCEL” button.
• When you press function button [4], protection is removed from the
selected image.
Protecting and Unprotecting Individual Image