58
Focus Mode
Focus-Point Selection
Choose a focus point for autofocus. The procedure for selecting the
focus point varies with the option chosen for AF mode (P 57).
R Focus-area selection can also be accessed using the G AUTOFOCUS SET-
TING option in the shooting menu (P 85).
R Focus-area selection can also be used to choose the focus point for manual
focus and focus zoom.
■ Single Point AF
Press the selector up (AF) to display the focus points (“”) and focus
frame. Use the selector to position the focus frame over the desired
focus point, or press DISP/BACK to return to the center point.
Focus frame
Focus point
To choose the size of the focus frame, rotate the sub-command dial.
Rotate the dial left to reduce the frame by up to 50%, right to enlarge it
by up to 150%, or press the center of the dial to restore the frame to its
original size. Press MENU/OK to put your selection into e ect.
To Next Page
