18
Charging the Battery
The battery is not charged at shipment. Turn the camera o and charge the battery before use. The
camera charges the battery internally.
• The camera uses an NP-W126S rechargeable battery.
• See the speci cations (P 140) for charging times.
1
Attach the plug adapter to the AC power
adapter.
Attach the plug adapter as shown, making
sure that it is fully inserted and clicks into place
on the AC power adapter terminals.
AC power adapter
Plug adapter
Q The plug adapter is exclusively for use with the
supplied AC power adapter. Do not use it with
other devices.
2
Charge the battery.
Connect the camera to the supplied AC pow-
er adapter using the supplied USB cable. Then
plug the AC power adapter into an indoor
power outlet.
Q Be sure the connectors are in the correct orien-
tation and then insert them fully.
Connect to camera
Micro USB (Micro-B)
connector
To Next Page
