68
5
Taking Photographs
Selecting a Focus Point
Use the focus stick (focus lever) to choose
the focus point and the rear command
dial to choose the size of the focus frame.
The procedure varies with the option se-
lected for AF mode.
AF mode
Focus stick
Rear command dial
Tilt
Press
Rotate
r
Select focus point
Select center focus
point
Choose from 6 frame
sizes
y
Choose from 3 frame
sizes
z
—
N
•
Manual focus-point selection is not available when z WIDE/
TRACKING is selected in focus mode l.
•
If j ALL is selected for AF mode, you can rotate the rear command
dial in the focus-point selection display to cycle through AF modes
in the following order: r SINGLE POINT (6 frame sizes), y ZONE
(3 frame sizes), and either z WIDE (focus mode l) or z TRACKING
(focus mode k).