Name and functions of components
10
Remote Controller
LCD display
Displays various kinds of
information.
“START/RESET” button
Starts and stops the massaging, and
stores the knead balls.
“AUTO COURSE” button
Desired body section and type of
massage can be selected out of 11
options in the AUTO COURSE.
“AIR” button
Desired section of body for the
air massage can be selected out o
4 options.
“REPEAT” button
This button allows repeating the
currently selected massage during the
AUTO COURSE.
“SKIP” button
This button allows interrupting the
currently selected massage and shifting
to next massage section.
“SHOULDER” button
This button is used to turn “ON/OFF”
the shoulder air massage or adjust its
intensity at one of 5 steps.
“MENU” button
Currently selected massage can be
adjusted with this button.
“CROSS KEY”
Use these keys when making
selections at various phases.
“ENTER” button
Use this button to finalize each
selection.
“UP”, “DOWN” button
Use these button to adjust the
angle of foot rest.
“VIBRATION” button
This button turns “ON/OFF”
the vibrator in the seat.
“RESET” button
“QUICK” button
These buttons allow selecting AUTO
COURSEs, which are
reprogrammed for the body sections
of standard body shape.
“STOP” button
Stops all movements.
(Use this button when it is necessary
to stop the massage immediately.)
“FUNCTION” button
Desired function can be selected from
22 types of massaging.
“HEIGHT ADJUSTMENT” button
This button allow finely adjusting the
shoulder position of knead balls during
AUTO COURSE and during the setting of
shoulder position for each selected function.
* Knead balls can be repositioned for each
selected function.
* Shoulder position may be adjusted finely even
on the way of using the AUTO COURSE..
“ARM” button
This button is used to turn “ON/OFF”
the arm air massage or adjust its
intensity at one of 5 steps.
RECLINER “UP”, “DOWN” button
Use these buttons to adjust the angle of
back rest or foot rest. These rests move
interlocked each other.
* Movements of “Air”, “Tapping” and
“Wavelet” are stopped on the way of
reclining.
“HEATER” button
Turns “ON/OFF” the heater.
Use this button when storing
the back rest and the foot rest.
* Back rest will not be able to erect
completely.
STOP
STAR
RESE
AUTO
FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST RECLINER
RESET
VIBRATION HEATER
HEIGH
DJUSTMEN
To Next Page
Loading...
