Adjustment of the chair
12
Reclining the chair
1. To turn down the back rest, press the RECLINER [T]
button.
• Holding down the RECLINER [T] button turns down the
back rest while the foot rest is raised.
• Stimulation by the knead balls becomes stronger as deep as
the back rest is turned down.
2. Release your finger from the RECLINER [T] button at
a desired angle.
• Foot rest angle will change depending on the reclining angle
of back rest.
3. To raise the back rest, press the RECLINER [S] button.
• Holding down the RECLINER [S] button raises the back
rest while the foot rest is lowered.
Before reclining the back rest or elevating
the foot rest, confirm there is nobody, pet or
obstruct at the back of main unit, under the
foot rest, or others.
There is risk of accident, injury or damaging
furniture, etc.
Do not ride on the back rest, arm rest or
shoulder unit.
There is risk of accident or injury when the
user or chair has collapsed.
■ Request: When using the reclining during the massage, turn down the back rest gradually observing
the change in the intensity of massage.
Raised state Turned-down state
CAUTION
WARNING
STOP
STAR
RESE
AUTO
FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST RECLINER
RESET
VIBRATION HEATER
HEIGH
ADJUSTMEN