Fujiiryoki SKS-1850 - Using the heater function;vibrator function; To use the heater function; To use the vibration massage

Using the heater function/vibrator function
42
Introduction
• After turning on the power, the screens as
shown at right are displayed alternately on
the LCD display in the initial state.
1. To use the heater function.
Press the button repeatedly to turn “ON/OFF”
the heater.
• “HEATER” lamp illuminates in the “ON” condition.
* HEATER stops automatically one hour later regardless of
the massage timer.
* Heater can be used independently.
* Do not use the heater at the same place for a long time.
(There is risk of cryogenic burn.)
2. To use the vibration massage.
① Press the [START/RESET] button.
• Foot rest rises automatically to
the standby position.
(To interrupt on the way, press
the [STOP] button.)
• Standby screen is displayed.
② Press the button repeatedly to turn “ON/OFF”.
Example of vibrator only on
* This function can be combined with the mechanical (knead
balls)/air massage.
STOP
STAR
T
/
RESE
T
AUTO FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST RECLINER
RESET
VIBRATION HEATER
HEIGH
T
ADJUSTMEN
T
VIBRATION HEATER
RESET