Adjustment during massaging with AUTO COURSE or in QUICK MODE
22
1. To adjust the intensity of mechanical (by knead
balls) massaging.
Adjust by pressing the switch and then press
the [ENTER] button.
• Intensity of mechanical (knead balls) massaging can be
adjusted at 7 steps.
• This is set initially at the
intensity “4”.
2. To adjust the intensity of air massage.
Adjust by pressing the switch and then
press the [ENTER] button.
• Air intensity can be adjusted at 5 steps.
• It is set initially at the intensity “3”.
• For adjustment of air
massage intensity on the
shoulder/arm, refer to P26.
3. To adjust the shoulder position/knead ball position.
Adjust by pressing the HEIGHT ADJUSTMENT [S]
or [T] button and then press the [ENTER] button.
• Shoulder position may also be adjusted with the
switch after pressing once the HEIGHT ADJUSTMENT
[S] or [T] button.
At this time, the Front and Rear position of knead balls can
also be adjusted with the switch.
Massage is applied at the position adjusted during the
movements of the “Neck Flex”, “Extreme Knead” and
“Extreme Tapping” in the AUTO COURSE. (This is
effective only for the “REJUVENATION” course of
“WHOLE BODY” and “SHOULDER”.)
STOP
STAR
RESE
AUTO
FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST RECLINER
RESET
VIBRATION HEATER
HEIGH
ADJUSTMEN
To Next Page
Loading...
