Fujiiryoki SKS-1850 - Using the mechanical (knead balls) massage functions; Introduction

Using the mechanical (knead balls) massage functions
31
Introduction
• After turning on the power, the screens
shown at right are displayed alternately on
the LCD screen in the initial state.
• When changing from a mechanical massage
to another mechanical massage or from
AUTO COURSE/QUICK MODE to a
mechanical massage (See P49)
• When combining an air massage with a
mechanical massage (See P45)
1. Press the [START/RESET] button.
• Foot rest goes up automatically to the standby position.
(To interrupt on the way, press the [STOP] button.
• Standby screen is displayed.
2. Press the [FUNCTION] button. Or select the
“Function” with the switch and then press
the [ENTER] button.
• List of functions is displayed.
* Movement will start 5 seconds later without pressing the
[ENTER] button.
(This applies also subsequent steps.)
STOP
STAR
T
/
RESE
T
AUTO FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST RECLINER
RESET
VIBRATION HEATER
HEIGH
T
ADJUSTMEN
T