Adjustment during massaging with AUTO COURSE or in QUICK MODE
24
7. To turn ON/OFF the “FOOT AIR”.
Press the [MENU] button. Adjust at the “FOOT AIR”
with the switch and select “ON/OFF” with the
switch. Press finally the [ENTER] button.
• It is set at “ON” initially.
• If the FOOT AIR is turned “OFF” when the FOOT AIR and
the COMBO FOOT REST are “ON”, the COMBO FOOT
REST is also turned “OFF”.
• If the FOOT AIR is turned “OFF” when the FOOT AIR and
the FOOT STRETCH are “ON”, the FOOT STRETCH is
also turned “OFF”.
8. To turn ON/OFF the “HEATER”.
“HEATER” can be turned “ON/OFF” by pressing
the button repeatedly.
• When the HEATER is “ON”, the “HEATER” lamp illuminates.
* Hater will be stopped after one hour regardless of the
massage timer.
* Heater can be used independently.
* Do not use the heater at the same place for a long time.
(There is risk of the cryogenic burn.)
9 To turn ON/OFF the “VIBRATION”.
VIBRATION can be turned “ON/OFF” by pressing
the repeatedly.
* You can use the vibration in combination with the
mechanical (knead balls)/air massage.
PULSE
FOOT AIR
STOP
STAR
RESE
AUTO
FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST RECLINER
RESET
VIBRATION HEATER
HEIGH
ADJUSTMEN
VIBRATION HEATER
RESET