Adjustment during the movement of mechanical (knead balls) massage functions
35
3. To adjust the height of massage section
(Point/Part)
Adjust with the HEIGHT ADJUSTMENT [S] or [T].
• This is adjustable when the massage section is selected at
the “POINT” or “PART”.
4. To adjust the shoulder or front and rear position
for the NECK FLEX/EXTREME KNEAD/EXTREME
TAPPING
Press the HEIGHT ADJUSTMENT [S] or [T] once
to display the adjustment screen. Adjust the
shoulder position with the switch or the
HIGHT ADJUSTMENT [S] or [T] and adjust the
fore and aft position of knead balls with the
switch.
5. To adjust the mechanical (knead balls) massage speed.
Press the [MENU] button. Adjust at the “Speed” with
the switch and select the “SLOW/FAST” with
the switch. Press the [ENTER] button finally.
• This can be set only for the movements
of “KNEAD UP”, “NEAD DOWN”,
“TAPPING”, “WAVELET”,
“RUBBING”, “DEEP KNEAD UP”,
“DEEP KNEAD DOWN”, “STRETCH
KNEAD UP”, “STRETCH TAPPING”,
and “STRETCH WAVELET”.
6. To adjust the mechanical (knead balls) massage width.
Press the [MENU] button. Adjust at the “Width”
with the switch and select the
“Narrow/Normal/Large” with the switch.
Press the [ENTER] button finally.
• This can be set only for the movements
of “TAPPING”, “SHIATSU”,
“ROLLING”. “STRETCH”, “3D
TAPPING” and “STRETCH
TAPPING”.
f
WIDTH
STOP
STAR
RESE
AUTO
FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST RECLINER
RESET
VIBRATION HEATER
HEIGH
ADJUSTMEN
To Next Page
Loading...
