A26361-K554-Z100-2-7619 39
Technical data
Electrical data
Regulations complied with: EN 60950 / VDE 0805, UL 1950
CSA 22.2 No.950
Protection class: I
Rated voltage range: (selectable) 100 V -120V/200V-240V
Frequency: 50 Hz - 60 Hz
Max. rated current 100 V -120 V/2.5 A
200 V -240 V/1.5 A
Maximum power draw in operation: < 50 W *)
Minimum power draw in operation:
reduced by Windows 9x Power
management advanced
<30W *)
Power draw in energy saving mode: < 30 W *)
Power draw in the 'ready' status < 5 W *)
Noise emission: Sound power level (
WAd
)<55dB(A)*)
*) These values only apply for a SCENIC eT with the configuration below. When additional or
other components are incorporated, the power consumption or the sound emission (L
WAd
)in
energy saving mode may exceed the requirements for the environment symbol ("Blue Angel")
(30 W or 55 dB).
Processor (256 Kbyte cache): Pentium III Processor at 933 MHz
Main memory: 128 Mbyte
Floppy disk drive: 1.44 Mbyte
Hard disk drive: 20 Gbyte
Software: Windows 98 SE Power management - Advanced...
CD-ROM drive 48fold
LAN: 10/100 Mbit Ethernet Controlle
Dimensions
Width/depth/height: 196 mm/350 mm/ 360 mm
Weight
in basic configuration ca. 8 kg (78.5 N) in basic configuration
Environmental conditions
Environment class 3K2
Environment class 2K2
DIN IEC 721 part 3-3
DIN IEC 721 part 3-2
Temperature:
• Operating (3K2)
• Transport (2K2)
15 °C .... 35 °C
-25 °C .... 60 °C
Condensation in operating must be avoided.
Clearance required to ensure adequate ventilation:
• left-hand side
• front
• rea
min. 200 mm
min. 200 mm
min. 200 mm
To Next Page
Loading...
Need help?
General
