Fujitsu AOYG24KBTA3 Design & Technical Manual

Condition which
requires addition
of outside heat
insulation
Relative humidity 80 %
Dry bulb temperature 30 °C
Figure 18-1 Moist air curve
Slit of heat insulating material
facing upward
Covered gas
pipe (heat
insulation
strengthened)
Heat insulating material
(locally purchased)
Small exposed part
of copper pipe is desirable.
Fit tightly
(purpose is to cover the sealant)
Binding material
Flare connection
To indoor unit
Heat insulation reinforcement material
(locally purchased)
Figure 18-2 Work method when reinforcing the heat insulation of on-site piping
- 340 -
18-2. Points to remember when installing 18. Indoor unit installation precautions
3-UNIT MULTI-SPLIT TYPE 3-UNIT MULTI-SPLIT TYPE

Fujitsu AOYG24KBTA3 Specifications

General

Brand	Fujitsu
Model	AOYG24KBTA3
Category	Air Conditioner
Language	English