Fujitsu ARGA18FMTA - Page 99

- 44 -
DUCT TYPE ARGA30-60F
7. Repeat steps 3 to 6 to perform additional settings. Press the SET TEMP. buttons ( ) ( ) and
FAN button simultaneously again for more than 5 seconds to cancel the function setting mode.
In addition, the function setting mode will be automatically canceled after 1 minute if no oper-
ation is performed.
8. After completing the function setting, be sure to turn off the power and turn it on again.
!
CAUTION
After turning off the power, wait 30 seconds or more before turning on the power again. The
function setting will not become active unless the power is turned off then on again.