EasyManua.ls Logo

Fujitsu arrows U - Materials

Fujitsu arrows U
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
103
Safety Precautions
arrows U
Handset Use & Electronic Medical
Equipment
Persons with an implanted pacemaker or
defibrillator should carry handset at least 15
cm away from the implant.
Radio waves may adversely affect operation of electronic
medical devices.
When using electronic medical equipment
(other than implanted cardiac pacemakers/
defibrillators) outside medical facilities,
check with the equipment manufacturer, etc.
regarding any effect that radio waves may
have on it.
Radio waves may adversely affect operation of electronic
medical devices.
Disable handset transmissions (e.g. Airplane
mode) or power off handset when it is difficult
to keep a distance of at least 15 cm away from
others such as in a crowd.
There may be someone who is wearing an implanted
pacemaker, defibrillator, or other medical device. Radio
waves may adversely affect operation of electronic medical
devices.
For use at a medical facility, follow the
instructions of the facility.
Radio waves may adversely affect operation of electronic
medical devices.
Materials
arrows U
Parts Materials Used/Surface Finish
Display Panel Tempered glass/AF coating
Exterior Case
(side)
PA-GF plastic/UV cured acrylic coating
Exterior Case
(rear case)
PC + ABS plastic/UV cured acrylic coating
Earpiece
Screen
PET/coating
Mobile Light
Lens
PMMA plastic/none
Camera Panel PMMA plastic/AF + AR coating
Power Key PC plastic/UV cured acrylic coating
Volume Key PC plastic/UV cured acrylic coating
Assistant Key PC plastic/UV cured acrylic coating
Slot Cap (cap) PC plastic/UV cured acrylic coating
Slot Cap (seal) TPU/none
Slot Cap
(tray)
POM plastic/laser marking
Speaker
Screen
PET/coating
Strap Pin Stainless steel/none
Stereo
Earphones
Port
PA plastic/none
IMEI Sheet
(sheet)
PET/printing
IMEI Sheet
(barcode)
PET/printing
USB Type-C
Port
PA plastic/none
SIM Removal Pin
Parts Materials Used/Surface Finish
SIM Removal
Pin
Stainless steel/none

Table of Contents

Related product manuals