Need help?Do you have a question about the Fujitsu ARTH30KMTAP and is the answer not in the manual?
General| Brand | Fujitsu |
|---|---|
| Model | ARTH30KMTAP |
| Category | Air Conditioner |
| Language | English |
Details technical specifications for indoor units including capacity, power, and dimensions.
Provides physical dimensions and detailed drawings for indoor unit models.
Illustrates the electrical connections and wiring schematics for indoor units.
Lists cooling and heating capacities based on various indoor/outdoor conditions.
Details fan speed, airflow rates, and performance curves for indoor units.
Presents noise level curves and measurement points for indoor unit operation.
Outlines the protection mechanisms and safety features integrated into indoor units.
Describes how to connect external devices for control and status monitoring.
Explains how to connect multiple indoor units for centralized group control.
Covers the operation, display, and specifications of the wired remote controller.
Details how to adjust operating functions via DIP switches and remote controller.
Lists the standard accessories included with the indoor units.
Describes optional components available for enhancing indoor unit functionality.
Details technical specifications for outdoor units including capacity, power, and dimensions.
Provides physical dimensions and detailed drawings for outdoor unit models.
Specifies required clearances and installation guidelines for safe outdoor unit placement.
Illustrates the refrigerant flow path and key components within the outdoor unit.
Shows the electrical connections and wiring schematics for the outdoor unit.
Provides correction factors for capacity based on pipe length and height differences.
Details how to calculate additional refrigerant charge based on pipe length.
Lists the airflow rates for cooling and heating modes in m³/h, l/s, and CFM.
Presents noise level curves for outdoor units across different frequency bands.
Specifies electrical parameters like voltage, current, and wiring requirements.
Outlines the protection mechanisms and safety features for outdoor units.
Describes external control signals for functions like low noise mode and peak cut.
Details local setting procedures for outdoor unit functions using control PCB buttons.
Lists the standard accessories included with the outdoor units.
Describes optional components for enhancing outdoor unit connectivity and control.
To Next Page