Fujitsu ARTH30KMTAP - 13-2. Others

13-2. Others
Exterior Part name Model name Summary
Remote sensor
unit
UTY-XSZX
Thermo-sensor for sensing the
temperature of arbitrary place in the
room.
Long-life filter UTD-LFDA
Long-life filter can be mounted to the
indoor unit.
External
connect kit
UTY-XWZXZG
Use to connect with various peripheral
devices and air conditioner PCB.
For control output port.
External input
and output PCB
UTY-XCSX
Use to connect with external devices
and air conditioner PCB.
External input
and output PCB
box
UTZ-GXDA
For installing the External input and
output PCB.
Zone control
interface
UTY-CDPXZC
UTY-CDPXZD
Controls the individual airflow to each
zone by opening and closing the
damper installed at the blowing side.
Wire type: Polar 3-wire
Zone control
interface
UTY-CDRXZC
UTY-CDRXZD
Controls the individual airflow to each
zone by opening and closing the
damper installed at the blowing side.
Wire type: Non-polar 2-wire
Modbus
converter
UTY-VMSX
For connection between indoor unit
with UART interface and a Modbus
open network.
KNX converter UTY-VKSX
For connection between indoor unit
with UART interface and a KNX open
network.
- 56 -
13-2. Others
13. Optional parts
DUCT TYPE
ARTH30-54KMTAP
DUCT TYPE
ARTH30-54KMTAP