Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decrease d by reducing
the brightness of the pictu re.
► Press the
ECO
button t o switch the ECO operating mode on or off.
The message ECO Mode on or ECO mode off appears.
If the ECO operat ing mode is activated, the following OSD settings are changed:
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is sw itched off, the brightness pre viously se t by the user is restore d.
Selecting the input signal (D-SUB/DVI-D/DisplayPort)
► Press the
INPUT
buttontocalluptheInput select setting window.
► Press the
/ button or the / button to select the de sire d m onitor
connection (VGA, DVI or DisplayPort).
► Press the
MENU
/ button to co n firm or the
AUTO
/ button to can cel.
This se tting window ca n also be called up when the OSD menu is locked.
Performing auto-adjustment of the monitor
This setting
is only possible with an a nalog VGA input.
► Press the
AUTO
button for about 1 second.
The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
22 Fujitsu
To Next Page
Loading...
