EasyManuals Logo

Fujitsu B22W-7 User Manual

Fujitsu B22W-7
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Troubleshooting
Troubleshooting
Should an error occur, rst check the following points. If the d istortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you cannot solve the problem, please contact our Service Desk.
Having this problem? Check the following points:
No screen display
Power indicator does not light u p
Check whether the power cable on the
monitor is connected correctly.
Check whether the comput
er is switched on.
No screen display
Power indicator is lit
Check whether the computer is switched on.
Check whether th e data cable for the
monitor is correctly attached to the monitor
port on the computer.
Press any key on the computer ke yboard.
The computer may be in power saving
mode.
Alter th e brightness and/or contrast until you
get a picture.
Message: No Signal
Check whether th e data cable for the
monitor is correctly attached to the monitor
port on the computer.
Check whether the computer is switched on.
Message:
Frequency out of range:
##kHz/##Hz
Please change the display mode
to 1680 x 1050 with 60 Hz
The input sign
al (horizontal frequency and
refresh rate
) at the displayed input does not
correspond t
o the technical data for the monitor.
Adjust the v
ideo frequency range using the
computer so
ftware (see d ocumentation for
the c ompu te
r or display adapter).
Set a different screen resolution using the
computer software (see docum entation for
the c ompu ter or display adapter).
Picture position not correct
The monitor recognises an unde ned mode (see
chapter "
Technical specication", Page 33).
Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is shaking
Check whether th e data cable for the
monitor is correctly attached to the monitor
port on the computer.
Press the
AUTO
button to conduct the
auto-adjustment of the screen.
Picture is wrongly ad justed
Run
the Factory Recall function in the OSD
men
u.
The Auto Processing message appears.
30 Fujitsu

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu B22W-7 and is the answer not in the manual?

Fujitsu B22W-7 Specifications

General IconGeneral
BrandFujitsu
ModelB22W-7
CategoryMonitor
LanguageEnglish

Related product manuals