Operation
Setting functions in the Advanced menu
Call up the Advanced setting window
Input select
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, w hen several signal sources are connected.
This requ ires t hat the graphic card used supports this function.
DDC-CI
Activation/deactivation of the DDC-CI
On = The DDC-CI function is enabled (standard setting)
Off = The D DC-CI function is disabled
ACR
Enable/disable A CR function
On = T he ACR function is enabled
Off = The ACR function is disabled (default setting)
Factory Recall
Activating the factory settings
With this function all settin gs are reset to the factory settings without
prompting for confirmation .
Press the
button to activate the function. The message Auto
Processing is displayed.
Displaying in
formatio n
Call the Information setting window
This function displays the m odel designation, se rial nu mber, resolution, H/V
frequency and ECO mode.
28 Fujitsu
To Next Page
Loading...
