Operation
Function Description
Call Indicator
Enable/disable call disp lay
This function shows the status of the user of the communication software
(e. g. Microsoft Lync / S kype for Business) via the LED on top of the monitor.
Incoming calls are indicated audibly by the communication software using
the monitor speakers.
This function is only available if your model has a call indicator display and
the commu nication software being used supports status transmission.
Daisy Chain
Enable/disable daisy cha
ining via Displayport.
This function allows the
desktop to be extended onto a monitor connected
via "DP OUT".
This option only appear
s if your model supports daisy chain and display port
or USB-C is selected as i
nput signal.
Overdrive
Enable/disable enhanced reaction time
This function can be used to improve the focus in f ast moving images.
This setting can only be configured in Video or Custom application mode.
DDC-CI
Enable/disable Display Data Channel - Command Interface
This function allows data to be exchanged via the connection between the
PC and the display.
Status LED
Enable/disable
Status LED
This function a
llows the power indicator on the monitor to be switched on
or off.
Factory reca
ll
Activate the factory settings
With this function all settings are reset to the factory settings.
► Press the
button to run the function.
► Press t he
buttontoconfi rm or the button to cancel.
The langu a
ge selection menu appears.
With a VGA
data cable, the messa ge Au to Processing is displayed.
Fujitsu 27
To Next Page
Loading...
Need help?
General