Operation
Select OSD language
When an OSD menu button is activated for th e first time, the language selection window will appear:
► Press the
button or the button to choose the desired language.
► Press the
button to confirm.
After selecting the OSD lan
guage for the first time, you can change
it at any time in the OSD.
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by redu cing
the brightness of the picture.
► Press the
ECO
button to switch the ECO operating mode on or off.
The message ECO Mode on or ECO Mode off is displayed.
If the ECO operating mode is activated, the fo llowing OSD settings are changed:
Mode
Office
Color
6500 K
Brightness
reduced
After the ECO operating mode is switched o ff, the brightness previously set by the user is re stored.
Selecting th
e input signal
► Press the
IN
PUT
button to open the Input s e lect setting window.
► Press the
button or the button to select the desired monitor connection (VGA, DVI or DP).
► Press the button to c onfirm or the buttontocancel.
This setting window can also be called up when the OSD menu is locked.
Adjust ing t he volume
► Press the button to open the Vol u m e setting window.
► Press the
button or the button to set the desired volume for the built-in s peakers.
► Press the
button to activate/deactivate the mute function.
► Press the
button to close the menu.
Fujitsu 23
To Next Page
Loading...
