First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied s oftware is
installed and configured. Because this procedure m ust not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using th e mains adapter.
During the installation process, DO NOT restart the d evice unless
you are requested to do so!
To make it easier to use yo
ur device for the first time, the operating system
is pre-installed on the
hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on t he system an d drivers, help programmes, updates, man uals etc. on
the device or on the Internet under "
http://www.fujitsu.com/fts/ suppor t/".
You can find information and help on the Windows operating system functions
on the Internet at "
http://windows .microsoft.com" .
18 Fujitsu
To Next Page
Loading...
