Connecting e xtern a l devices
Connecting an external monitor
An analogue monitor is connected to the analogue VGA monitor port (notebook and optional port
replicator), a digital monitor to the display port or the DVI-D monitor port on the optional port replicator
(optional port r eplicator only). The screen output is limited to a maximum of two screens at the same
time (see "
Functio n keys and key comb inations", Page 25, section "Ch anging the screen output").
MonitorVGAconnec tionsocketMonitorportMonitorp ort
Analogue VGA monitor port (on notebook or on
optional port replicator)
Digital HDMI port (on the notebook)
Digital DVI-D monitor port (on the optional Port
Replicator)
Digital display port (on the optional port
replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the noteboo k.
You can also switch between the external mon itor and the LCD monitor of the
notebook, see chapter "
Functio n keys and key combinations", Page 25.
You can display the same picture o n the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor v ia a DVI port, use the optio nal Port
Replicator available for your notebook.
Fujitsu 57
To Next Page
Loading...
