Working with the notebook
Setting up WLAN access
• Requirement: A WLAN must be available and you must h ave the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via LTE (optiona l)
If you ordered an integrated LTE module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional LTE m odule is ready for use straight a way.
You will find information on establishing the connection with the LTE n etwork in the
documentation for the hardw are y ou plan to use.
Your device can c onne ct with the Internet via LTE. To do this, use on e of
the following types of connection:
• Integrated LTE module (depending o n yo ur model variant)
• a USB dongle (a USB stick with your mobile phone provider’s SIM card)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Lo cal Area Ne twork).
2
1
► Connect the network cable to the LAN
port of the no tebook (1).
► Connect the network cable to your
network connection (2).
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type o f
cable can be obtained from a specialist dealer.
Use a shielded network c able (CAT 5e).
Fujitsu 41
To Next Page
Loading...
