Working with the notebook
Connecting the noteboo k to the Port Replicator
If you connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
The mains adapter must be conne cted to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD monitor closed whe n
the notebook is connected to the Port Replicator. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.
PortReplicator
► Switch the notebook off.
► Remove the power plug of the mains ada pter from the mains so cket.
► Disconnect the ma ins adapt er cable from the DC socket (DC IN) of the notebook.
► Positio
n the notebook so that it is in line w ith the back edge of the Port Replicator.
► Push the notebook onto the port replicator until it clicks into position.
Fujitsu 45
To Next Page
Loading...
