Operation
Activate/deactivate ECO operating mode
The pow er consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
/ button to switch the ECO operating mode on or o ff.
The message ECO Mode ein or ECO Mode off appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switch ed o ff, the brightness previously set by the user is re stored.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press and hold th e
ECO
/ and
INPUT
/ buttons at the sam e time for a few seconds.
The m essage Power
button locked / unlocked is displayed.
Proceed in the s
ame way to release the locked ON/O FF switch again.
Fujitsu 23
To Next Page
Loading...
