Fujitsu E22T-7 Pro - Page 26

Operation
Select OSD language
When an OS D men u button is activated for the first time, the language selection window will appear:
► Press the
button or the button to choose the desired language.
► Press the
button to confirm.
After selecting the O SD lan
guage for the first time, you can change
it at any time in the OSD.
Activate/deactivate ECO operating m ode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
button to switch the ECO operating mode on or off.

The message ECO Mode on or ECO Mode off is displayed.
If the ECO operating mode is activated, the following O SD settings are changed:
Mode
Office
Color
6500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Selecting th
e input signal
► Press the
IN
PUT
buttontoopentheInput select setting w indow.
► Press the
button or the button to select the desired monitor port.
► Press the
button to confirm or the button to cancel.
This setting window can also be called up when the OSD menu is locked.
Adjusting the volume
► Pres
sthe
button to open th e Vol u m e se tting window.
► Press the
button or the button to set the desired volume for the built-in speakers.
► Pr
ess the button to activate/deactivate the mute function.
► Press the
button to close the m enu.
22 Fujitsu