Operation
Adjusting the brightness
► Press the button to open the Brightness setting window.
► Press the
button or the button to set the desired brightness.
► Press the
button to close the menu.
Performing auto-adjustment of the m onitor
This function is only intended for analogue image transmission (VGA).
► Press the
AUTO
button for about 1 second.
The Auto Processing m
essage appears.
Picture quality and position are set to optimum values for your system.
Locking the OSD me
nu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press the
MENU
button and the ON/OFF button at the same time for several seconds.
The message OSD l
ocked / unlocked is displayed.
Please procee
d in the same manner to release the locked OSD menu again.
Lock the ON/OFF button
The O N/O FF button can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the
ECO
button and
INPUT
button at the same time for a few seconds.
The message Power button loc ked / unlocked is displayed.
To remove the locking of the ON/OFF button again, proceed in the same way.
Fujitsu 23
To Next Page
Loading...
Need help?
General