Fujitsu ETERNUS DX S4 Series - Trouble Record; Figure 6.1 Trouble Record

Chapter 6 Operation and Maintenance
6.3 Troubleshooting
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
76
6.3.2 Trouble Record
If trouble occurs, record the power synchronized unit and AC sensor unit conditions in Figure 6.1, and contact
your maintenance engineer.
Figure 6.1 Trouble record
Trouble Record
1: Please identify your power synchronized unit:
(Check the Manufacturer’s label)
MODEL
SER.NO.
2: Please enter the following information:
No. of connected server UPS units
Model names of connected server UPS units
No. of connected AC sensor units
No. of connected storage systems
Is the power synchronized unit cascaded?
3: Check the state of the following LEDs on the power synchronized unit:
POWER
POWER SENSOR
POWER CONTROL
CHECK
4: Is the LED on the AC sensor unit on?
5: Other
(On, Off, Blinking)
(On, Off)
(On, Off, Blinking)
(On, Off, Blinking)
(Yes, No)
(Yes, No)