Fujitsu Eternus DX500 S3 - Page 1003

Appendix B Factory Default List
B.3 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1003
The default value for "iSCSI Name"
The default "iSCSI Name" varies depending on the factory setting. The setting for "iSCSI Name" is as follows:
iqn.2000-09.com.fujitsu:storage-system.eternus-xxxx:00yyyyyy
• xxxx
The following character strings are specified for each model.
- For the ETERNUS DX60 S3/DX100 S3/DX200 S3
"dxl"
- For the ETERNUS DX500 S3/DX600 S3
"dxm"
- For the ETERNUS DX8700 S3/DX8900 S3
"dxh"
- For the ETERNUS DX200F
"dxl"
• yyyyyy
"Model ID + unique number" for WWN is specified.