Fujitsu Eternus DX500 S3 - A.4.4 LUN Group Management

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
868
A.4.3.10 Modify Port Mode
For details about this function, refer to "4.3.11 Modify Port Mode" (page 459).
For the factory default settings for this function, refer to "Appendix B Modify Port Mode" (page 999)
.
● Port List
• Port Mode(After)
A.4.4 LUN Group Management
A.4.4.1 Add LUN Group
For details about this function, refer to "4.4.1 Add LUN Group" (page 462).
For the factory default settings for this function, refer to "Appendix B Add LUN Group" (page 999)
.
● LUN Group Setting
• Name
● Define LUN Group
• Checkbox to select a volume
Description Select the changed port mode.
"Initiator" is displayed only for FC ports.
The current port mode is displayed by default.
Input condition/
Display contents
• CA
• RA
• CA/RA
• Initiator
Description Specify the LUN group name.
An existing LUN group name cannot be specified.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Select checkboxes for LUNs and volume allocation information that are to be deleted
from the LUN group.
Input condition/
Display contents
Checkbox
• Selected
• Cleared