Fujitsu Eternus DX500 S3 - Modify Key Server

Chapter 1 System Management
1.11 Key Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
170
2 Click the [OK] button.
 Deleting of the key server starts.
3 Click the [Done] button to return to the [Key Management] screen.
End of procedure
1.11.4 Modify Key Server
This function changes the key server settings.
For details on the parameters for this function, refer to "A.1.10.3 Modify Key Server" (page 753)
.
The procedure to change the key server settings is as follows:
Procedure
1 Select the key server that is to be changed and click [Modify Key Server] in [Action].
• Key server settings that are allocated to a key group can be changed.
• This function can be used to change "Domain Name / IP Address", "Port No.", and "LAN Port".
• This function can be used even when operations are being performed for the volumes that configures a
key management target RAID group.