Fujitsu Eternus DX500 S3 - Delete Key Server

Chapter 1 System Management
1.11 Key Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
169
The main setting items are as follows.
● Key Server Setting
• Domain Name / IP Address
• Port No.
• LAN Port
3 Click the [Add] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Adding of the key server starts.
5 Click the [Done] button to return to the [Key Management] screen.
End of procedure
1.11.3 Delete Key Server
This function deletes key servers.
The procedure to delete key servers is as follows:
Procedure
1 Select the key server that is to be deleted (multiple selections can be made) and click
[Delete Key Server] in [Action].
 A confirmation screen appears.
If an error screen appears under the following conditions, check the parameter settings.
• When each parameter fails to satisfy the input conditions
• When inputting a domain name or an IP address that is already used for another key server
• When the IP address that was input and the IP address of the LAN port (MNT or RMT) are the same
• When the IP address that was input and the network address of the LAN port (MNT or RMT)are the
same
A key server that is allocated to a key group cannot be deleted. Refer to the "Master Server" field and the
"Slave Server" field in the [Key Group] screen to check whether the key server is allocated to the key group.
Refer to "Key Group" in "ETERNUS Web GUI User’s Guide (Operation)" for details.