Fujitsu Eternus DX500 S3 - Page 1005

Appendix B Factory Default List
B.4 RAID Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1005
■ Expand RAID Group
■ Modify RAID Group Parameters
■ Assign Eco-mode Schedule (RAID Group)
■ Set Key Group (RAID Group)
Screen Setting item Default value
Manual Setting RAID Level after expand High Performance (RAID1+0)
Screen Setting item Default value
Parameters Setting Rebuild Priority
• When the RAID level is not "High Reliability
(RAID6-FR)"
Low
• When the RAID level is "High Reliability
(RAID6-FR)"
High
Advanced Settings DCMF 1
Drive Access Priority Response
Drive Tuning Parameter Setting Enable
Throttle 100%
Ordered Cut 400
Screen Setting item Default value
Eco-mode Schedule Settings Eco-mode Action
• When no Eco-mode schedules are registered
Drive always on
• When Eco-mode schedules are registered
Do not change
Screen Setting item Default value
Key Group Setting Key Group Enable