Chapter 7 Advanced Copy Management
7.6 Modify Copy Table Size
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
603
There are two methods to set the copy table size: manually and automatically.
The procedure to set the copy table size is as follows:
■ Manually setting the copy table size
Specify the copy table size manually.
1 Click [Modify Copy Table Size] in [Action].
2 Specify each items.
The main setting items are as follows.
● Advanced Copy Table Size Setting
• Resolution
• Table Size (MB)
• Table Size Threshold (%)
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
Setting of the copy table size starts.
5 Click the [Done] button to return to the [Setting] screen.
To Next Page
Loading...
