Fujitsu Eternus DX500 S3 - Page 983

Appendix B Factory Default List
B.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
983
■ Setup Event Notification
■ Export/Delete Log
■ Export/Delete Panic Dump
■ Audit Log
*1: The Audit log function is disabled by default and only the [Enable Audit log] function is available.
■ Setup Audit Log
■ Add Key Server
Screen Setting item Default value
Setting based on Severity Checkbox to select the notifica-
tion method
Refer to "Initial state list" (page 741)
for details.
Error Severity Level
Warning Severity Level
Informational Level
Screen Setting item Default value
Option Specify Time Range No
Include I/O Module log Yes
Log File Size Non-segmentation
Delete of Customer
Information
No
Screen Setting item Default value
Panic Dumps Panic Dumps Cleared
Option Dump File Segment Size Non-segmentation
Screen Setting item Default value
Enable Audit Log Operation mode Disable (*1)
Disable Audit Log
Screen Setting item Default value
Syslog Server1, Syslog Server2 Send Audit Log off
Port No. 514
LAN Port MNT
Screen Setting item Default value
Key Server Setting Port No. 5696
LAN Port MNT