Fujitsu Eternus DX80 S2 - Function Specifications; Table 2.3 ETERNUS DX80 S2;DX90 S2 Function Specifications

Chapter 2 Specifications
2.2 Function Specifications
ETERNUS DX80 S2/DX90 S2 Disk storage system Overview
Copyright 2013 FUJITSU LIMITED P3AM-4812-11ENZ0
20
2.2 Function Specifications
This section contains the specifications of the functions for the ETERNUS DX Disk storage system.
Table 2.3 ETERNUS DX80 S2/DX90 S2 function specifications
Item ETERNUS DX80 S2 ETERNUS DX90 S2
Supported RAID levels
0
*1
, 1, 1+0, 5, 5+0, 6
RAID groups
Number of RAID groups (max.)
*2
60 120
Number of volumes per RAID group 128
Volumes Number of volumes (max.) 2048 4096
Volume capacity (max.) 128TB
Number of
connectable hosts
(max.)
*3
per storage system 1024
per port 256
Thin Provisioning
*4
Number of pools (max.) 60 120
Pool capacity (max.) 128TB
Total capacity of Thin Provisioning
Volumes
128TB
Flexible Tier (auto-
matic storage
layering)
*4
Number of pools (max.) 60 120
Pool capacity (max.) 128TB
Total capacity of Flexible Tier
Volumes
128TB
Advanced Copy
*4
Local copy Types
EC, OPC, QuickOPC, SnapOPC, SnapOPC+
*5
Number of copy
generations
(SnapOPC+)
512
Remote copy Type
—
REC
*5
Interfaces
—
FC (16Gbit/s, 8Gbit/s,
4Gbit/s)
FC (8Gbit/s, 4Gbit/s,
2Gbit/s)
iSCSI (10Gbit/s)
iSCSI (1Gbit/s)
Number of
connectable
storage systems
(max.)
—
16
*6
Number of copy sessions (max.) 1024 2048
Number of copy sessions per
volume (max.)
32
Number of copy sessions for a
single area (max.)
*7
8