Fujitsu Eternus DX80 S2 - Performance Information Management; Figure 5.18 Event Notification

Chapter 5 Basic Functions
5.5 Operation Monitoring
ETERNUS DX80 S2/DX90 S2 Disk storage system Overview
Copyright 2013 FUJITSU LIMITED P3AM-4812-11ENZ0
71
• Host sense
The ETERNUS DX Disk storage system returns host senses (sense codes) to notify specific status to the
server. Detailed information such as error contents can be obtained from the sense code.
Figure 5.18 Event notification
5.5.3 Performance Information Management
The ETERNUS DX Disk storage system supports a function that collects and displays performance data via
ETERNUS Web GUI or ETERNUS CLI. The collected performance information shows the operation status and
load status of the ETERNUS DX Disk storage system and can be used to optimize the system configuration.
Performance information can be collected such as host I/O information (IOPS values, throughput values,
respond time, cache hit rate), QoS information (IOPS values, throughput values, delay time), and the usage
information of CMs (CPUs) and drives.
ETERNUS SF Storage Cruiser or ETERNUS SF Express can be used to easily understand the operation status and
load status of the ETERNUS DX Disk storage system by graphically displaying the collected information on GUI.
ETERNUS SF Storage Cruiser can also monitor the performance threshold and retain performance information
for the duration that a user specifies.
For details, refer to the manuals of ETERNUS SF Storage Cruiser and ETERNUS SF Express.
SNMP
manager
Mail
server
Syslog
server
ETERNUS DX Disk
storage system
Remote
support
center
REMCS/AIS
Connect
Host sense
Server
(host)
syslogSNMP TrapE-mail