Fujitsu Eternus DX80 S2 - Managing CLI User Authority; Note for Specifying FTP Server; Understanding Command Descriptions

Chapter 3 Connection Configurations
3.3 LAN
ETERNUS DX80 S2/DX90 S2 Disk storage system Overview
Copyright 2013 FUJITSU LIMITED P3AM-4812-11ENZ0
31
3.3 LAN
For ETERNUS DX Disk storage systems, operations such as RAID configuration, operation management, and
system maintenance are performed via the LAN.
The functions of the management/monitoring server on the LAN, which include SNMP (device monitoring),
SMTP (sending e-mails), NTP (time correction), syslog (event notification and audit log sending), RADIUS
(user authentication), and KMIP (key management) can also be used.
Any errors that occur in the ETERNUS DX Disk storage system are notified to the remote support center when
remote support is used.
3.4 Power Synchronization
Powering the ETERNUS DX Disk storage system on and off can be automatically controlled with a server.
● Power synchronized unit
A power synchronized unit detects changes in the AC power output of the Uninterruptible Power Supply
(UPS) unit that is connected to the server and automatically turns on and off the ETERNUS DX Disk storage
system.