Fujitsu ETERNUS LT60 S2 - Page 27

Chapter 1 Overview
1.2 References for Setup
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User’s Guide -Server Connection-
Copyright 2021 FUJITSU LIMITED P3AM-5322-12ENZ0
27
Setting the LT20 S2/LT40 S2/LT60 S2
Perform the settings for the LT20 S2/LT40 S2/LT60 S2.
- "2.1 Settings for SAS Connections" (page 31)
Setting the Operating System
Perform the settings for the HBA driver and the tape driver.
- "3.3 Windows" (page 41)
- "3.3.1 SAS Connections" (page 41)
Setting Backup Software
Apply patches, set the robot driver, and set the backup software.
• Backup software used
- NetBackup
• "4.1 NetBackup" (page 47)
- IBM Spectrum Protect (IBM Tivoli Storage Manager)
• "4.3 IBM Spectrum Protect" (page 53)
- Backup Exec
• "4.4 Backup Exec" (page 54)
- NetVault
• "4.5 NetVault" (page 55)
- ARCserve Backup
• "4.6 ARCserve Backup" (page 65)
- Veeam Backup & Replication
• "4.7 Veeam Backup & Replication" (page 66)
Refer
Refer
Refer