Fujitsu ETERNUS LT60 S2 - 4.3 IBM Spectrum Protect Setup

Chapter 4 Setting the Backup Software
4.3 IBM Spectrum Protect
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User’s Guide -Server Connection-
Copyright 2021 FUJITSU LIMITED P3AM-5322-12ENZ0
53
4.3 IBM Spectrum Protect
This section provides notes on the settings that are performed for IBM Spectrum Protect.
4.3.1 Notes on Operation
■ Cleaning tape drives
IBM Spectrum Protect has a function to automatically clean tape drives. When automatically cleaning tape
drives, use the IBM Spectrum Protect's automatic cleaning function.
4.3.2 Device Drivers
When using IBM Spectrum Protect for the LT20 S2/LT40 S2/LT60 S2, use the IBM Spectrum Protect device
driver. The IBM Spectrum Protect device driver is supplied with IBM Spectrum Protect. For details, refer to the
manual supplied with your software.
4.3.3 Notes on Using Solaris OS
For Solaris 10 OS or Solaris 11 OS, only the global zone is supported by IBM Spectrum Protect.
In case that the Solaris 10 OS is used, both IBM Spectrum Protect server and IBM Spectrum Protect agent can
connect to the LT20 S2/LT40 S2/LT60 S2. In case that the Solaris 11 OS is used, only IBM Spectrum Protect
agent can connect to the LT20 S2/LT40 S2/LT60 S2.