Chapter 3 Notes
> 3.4 ETERNUS Disk Storage System Driver Notes
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
14
Copyright 2010 FUJITSU LIMITED
P3AM-2922-05ENZ0
3.4 ETERNUS Disk Storage System Driver Notes
When connecting the server to the ETERNUS Disk storage system with multipath configuration,
using the path redundancy control (path fail-over) function with a driver for ETERNUS Disk
storage systems, one of the following drivers is required by the server:
For product information, refer to the following URL:
http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/soft-
ware/eternusmpd/
Even when single-path connection is used between the ETERNUS Disk storage system and
server, an event log extraction capable ETERNUS Disk storage system compatible driver
(ETERNUS Multipath Driver or GR Multipath Driver) may be required by the server, as detailed in
the following table:
For product information, contact your Fujitsu engineer.
OS Driver
Windows Server® 2008 R2
Windows Server® 2008
Windows Server® 2003
ETERNUS Multipath Driver
Windows® 2000 GR Multipath Driver
ETERNUS Disk
storage system
Model OS
Driver for single-path
connection
ETERNUS2000 100, 200
Windows Server® 2008 R2
None
Windows Server® 2008
Windows Server® 2003
Windows® 2000
ETERNUS4000
300, 500
Windows Server® 2008 R2
None
Windows Server® 2008
Windows Server® 2003 ETERNUS Multipath Driver
Windows® 2000 GR Multipath Driver
400, 600
Windows Server® 2008 R2
None
Windows Server® 2008
Windows Server® 2003
Windows® 2000
ETERNUS8000
700, 900, 1100,
2100
Windows Server® 2008 R2
None
Windows Server® 2008
Windows Server® 2003 ETERNUS Multipath Driver
Windows® 2000 GR Multipath Driver
800, 1200, 2200
Windows Server® 2008 R2
None
Windows Server® 2008
Windows Server® 2003
Windows® 2000
To Next Page
Loading...
Need help?
General
