Fujitsu ETERNUS Server Connection Guide

ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
26
Copyright 2010 FUJITSU LIMITED
P3AM-2922-05ENZ0
Chapter 9 Checking the Registry Information
Check the value of the "TimeOutValue" registry key.
If the "TimeOutValue" registry key does not exist, then create it.
The registry file should be backed up before creating or changing any registry values.
Procedure
1 Start "regedit.exe".
2 Follow the path described below:
3 Check the value of the registry key named "TimeOutValue".
Check that the value of the "TimeOutValue" registry key is "0x3c". If set to a different value,
change it to "0x3c".
4 If any registry values were added or modified, reboot the server. The modified
settings will be enabled after the reboot.
End of procedure
• If the "TimeOutValue" key doesn't exist, add a registry key with
the following values:
• The "Name" field is case-sensitive.
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Disk
Name TimeOutValue
Type REG_DWORD
Radix Hexadecimal
Data 3C

Fujitsu ETERNUS Specifications

General

Category	Storage
Brand	Fujitsu
Product Line	ETERNUS
Capacity	Varies by model
Interface	SAS, iSCSI, Fibre Channel
Management Software	ETERNUS SF