Chapter 8 Installing Drivers
> 8.2 Multipath Environment Configuration
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
24
Copyright 2010 FUJITSU LIMITED
P3AM-2922-05ENZ0
2 In the MPIO properties window, select the [MIPO-ed Devices], and click the
[Add] button.
3 Enter the ID of the ETERNUS Disk storage system that is to be connected in the
[Device Hardware ID] field.
Enter the ID as follows;
For ETERNUS2000: FUJITSU E2000
For ETERNUS4000: FUJITSU E4000
For ETERNUS8000: FUJITSU E8000
4 Connect the ETERNUS Disk storage system using multipath configuration with
the server turned off, and then turn the server on.
End of procedure
A space is required between the "FUJITSU" and the "E_...".
To Next Page
Loading...
Need help?
General
